PL664 MODULE
The PL664 module has four good quality clamshell sockets for programming 44 pin PICs in MQFP (I/PQ) packages.
SPECIAL FEATURES
Extra hardware circuits in this module change the parallel data fromthe programmer into serial data for programming devices to reduceprogramming times. For example, four 16C64As can be programmed and verified in about 13 seconds using two modules.
IN CIRCUIT PROGRAMMING
These modules can also program PICs assembled to circuit boards.A single in line header can be fitted so a simple ribbon cablecan be connected to the target pcb. Each module can program fourboards so eight boards can be gang programmed with two modules.
PROGRAMMER
RAM CONFIGURATION
For PICs in the 18CXXX or 18FXXX families, the programmer ram needs to be
32M bits because the configuration byte addresses specified by Microchip
are at very high addresses. For other PICs the ram size of the programmer
does not matter.
TYPICAL PICs
18F4220, 18F4320, 18F4331, 18F442,
18F4420, 18F44K20, 18F4423, 18F4431, 18F4455, 18F448, 18F4480,
18F452, 18F4515, 18F4520, 18F45K20, 18F4523, 18F4525, 18F4550,
18F458, 18F4580, 18F4585, 18F4610, 18F4620, 18F4680.
16F74, 16F77, 16F871, 16F874, 16F874A
16F877, 16F877A, 16F884, 16F887, 16F914, 16F917.
18C442, 18C452,
16C64A, 16C65A, 16C74A, 16C77.
LC versions and all oscillator types are also supported.
RELATED MODULES
The same devices in TQFP can be programmed on the PL662 module.
Similar devices in dual in line (DIL) packages can be programmed by the PL651 module which has four sockets. Similar PLCC devicescan be programmed by the PL654 module.
|
