PL662 MODULE
The PL662 module has two good quality clamshell sockets for programming 44 pin PICs in TQFP (I/PT) packages.
SPECIAL FEATURES
Extra hardware circuits in this module change the parallel data fromthe programmer into serial data for programming devices to reduceprogramming times. For example, four 16C64As can be programmed and verified in about 13 seconds using two modules.
IN CIRCUIT PROGRAMMING
These modules can also program PICs assembled to circuit boards.A single in line header can be fitted so a simple ribbon cablecan be connected to the target pcb. Each module can program twoboards so four boards can be gang programmed with two modules.
PROGRAMMER RAM CONFIGURATION
For PICs with part numbers starting 18F or 18C it is essential to have 32M
bits of ram. For all other PICs the ram size does not matter.
TYPICAL PICs
18F4220,
18F4320, 18F4331, 18F442, 18F4420, 18F44K20, 18F4423, 18F4431,
18F4455, 18F448, 18F4480, 18F452, 18F4515, 18F4520, 18F45K20,
18F4523, 18F4525, 18F4550, 18F458, 18F4580, 18F4585, 18F4610,
18F4620, 18F4680.
16F74, 16F77, 16F871, 16F874, 16F874A
16F877, 16F877A, 16F884, 16F887, 16F914, 16F917.
18C442, 18C452,
16C64A, 16C65A, 16C74A, 16C77.
LC versions and all oscillator types are also supported.
RELATED MODULES
The same devices in MQFP can be programmed on the PL664 modulewhich has four sockets.
Similar devices in dual in line (DIL) packages can be programmed by the PL651 module which has four sockets. Similar PLCC devicescan be programmed by the PL654 module.
|
