 |
 |
|
PL460 MODULE The PL460 module supports 32 pin LCC eproms, eeproms and flash memory up to 27512. Devices can be gang programmed with identical data or set programmed for 16 or 32 bit systems. For example, a set of four 27C512s could be set programmed for a 32 bit system. If there are two devices in a set, twice as much ram is required in the programmer etc. TYPICAL EPROMS ETC 2564, 27(C)64, 27C64(A/F/L), 2864(A/B/C), 28HC64, 48Z08/9, 5749B, 87C64, 27(C)128(A), 57126/7, 57128F, 27(C)256(A/B), 27HC256, 27F256, 28C256, 28F256(A), 29C256/7, 29LV256A, CYC271A, 58C256, 87C257, 26C512A, 27(C)512(A/L/F), 27HC512. TYPICAL FLASH 28F256(A), 28F512(A). PROGRAMMER RAM CONFIGURATION The programmer ram size does not matter for gang programming as the largest device is 0.5M bits. Up to eight 27C256 or similar devices can be set programmed with 2M bits of programmer ram. To program a set of eight 27C512 or similar a minimum of 4M bits is required. RELATED MODULES Similar DIL devices can be programmed by the PL300 module whilst PLCC devices are supported on the PL328. LCC devices from 1 - 8M bits are supported on the PL450 module. |
| Device SearchHomeCompanyClientsDistributors Gang Programmers Socket AdaptorsEcal Development System NewsEnquiry FormRequest a Quote
| |||||||||