 |
|
PL445 MODULE
The PL445 module supports 44 pin PLCC eproms such as 27C1024 and flash.
SPECIAL FEATURES
This module can either gang program two devices with identical data
or pairs of devices for 32 bit systems. Note that two modules are needed
to program a 64 bit system.
This module is fitted with clamshell sockets which have a life expectancy
of about 50,000 insertions.
TYPICAL EPROMS
27C1024(A), 27(C)210(L), 27C202, 27C210, 27C220, 27C2048, 27C240,
27C402, 27C4002, 57C65.
TYPICAL FLASH
28F102.
PROGRAMMER RAM CONFIGURATION
For gang programming with identical data, the programmer ram
must not be smaller than the device size. For example, 4M bits
of ram is required for gang programming 27C4096s.
However, for set programming a pair of devices with 32 bit data,
twice as much programmer ram is required. For example, 8M bits
of programmer ram is needed to program a pair of two 27C4096s.
RELATED MODULES
Similar PLCC devices can be programmed by the PL444 module which is
fitted with plug-in auto-eject sockets.
DIL devices can be programmed on the PL400 module.
|
|
This site is designed and managed by Abacus Tree - Copyright ©
|
|