PL333 MODULE
The PL333 module supports 32 pin TSOP flash and eproms from 1 to 8M
bits.
SPECIAL FEATURES
This module can either gang program up to four devices with identical
data or pairs of devices for 16 bit systems or a set of four devices
for 32 bit systems. The PL333 also supports mask compatible devices.
TYPICAL EPROMS, EEPROMS AND NV RAMS
1M Devices
27C010(A/L), 27H010, 27(C)011, 27C100, 27C1000,
27C1001, 27C011, 27C301(A), 27C301P, 27V101, 29C010(A),
571000, 571001, 29EE010, 29LE010.
2M Devices
27C020, 27C200, 27C201, 27C202, 27C020, 27C2001, 28F020(A).
4M Devices
27C040, 27C4001, 29C040, 574000.
8M Devices
27C080.
TYPICAL FLASH
1M Devices
28F010(A), 28F101, 28F1000.
2M Devices
28F020(A), 28F201, 28F2000, 29F002B/T.
4M Devices
29F040(A/B), 28F4000, 49F040.
8M Devices
29F080(B).
PROGRAMMER RAM CONFIGURATION
For gang programming with identical data, the programmer ram size
must not be smaller than the device size. For example, 4M bits
of ram is required for gang programming 29F040s.
However, for set programming a pair of devices with 16 bit data,
twice as much programmer ram is required. For programming a set
of four devices with 32 bit data, four times as much programmer
ram is required. For example, 16M bits of programmer ram is
needed to program a set of four 28F040s. As the programmer
is not available with 16M bits of ram, a machine with 32M bits
would be needed.
RELATED MODULES
DIL ---- PL300
PLCC - PL332 and PL232 (L9000 and M9000 only)
PLCC - PLF332 (fxRAPIDO only)
|
